8mm (5/16) duotight x 6 Way Manifold with Check Valves & Isolation Valves

This manifold bracket comes fitted with checkvalves per ball valve outlet. Each check can also be removed if you want gas or water to move freely in all directions.If you want to cap off certain lines, we would recommend using the KL06958 duotight – 8mm (5/16′) PlugUsing a thin flat headed screw driver, simply slide/pop the black retainer tabs and remove the ball valve The duotight 8mm 6 way manifold is complete with mounting capabilities out of the box using button head screws. But if you’re going to mount it on a kegerator, we would suggest using the duotight 8mm adhesive brackets (no drilling required)(not suitable for liquids other than filtered water)Compatible with our KL06224 – EVABarrier 4mm ID x 8mm OD line KL06231- EVABarrier 5mm ID x 8mm OD line KL42741 – Red EVABarrier 5mm ID x 8mm OD line KL42765 – Black Lightshield EVABarrier 4mm ID x 8mm OD line Not compatible with 6mm ID x 10mm OD lineThe thread on this fitting will suit: MFL Threaded Ball Lock and Pin Lock Disconnects MK3 & MK4 Regulators Many other home brew fittings with MFL Thread Please note it does not suit the MK5 RegulatorLooking for high quality push in fittings that will seal tight? duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.Why do we use Double O-rings? The secret to our superior sealing performance is not just the fact that we use high quality EPDM and a Silicone O-Ring.Why two different materials? EPDM has a high gas and chemical resistance, but when chilled it can shrink slightly. Silicone O-Rings are also very chemical resistant but perform far better under sub-zero conditions not losing their shape. By having the best of both worlds we’re making sure there is twice as much sealing surface compared to other push in fittings on the market with just one. This makes our fittings even more reliable across a multitude of applications and reduces the chance of a leak significantly.The double o-ring system also means that we can bend the hose with much tighter radius without causing leaking issues. This typically can be an issue with other fittings. This combination of factors makes duotight fittings the most reliable push fit fittings on the market.No clamps necessary! We do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed.